Farmtrac 60 Tractor 2020
Repaint Process & Modifications
This is Farmtrac 60 and model 1996, we repaint in January 2020, after 26 years later. Before repainted tractor, the paint was fully damaged and some dents on the body. Firstly we wash tractor with the paint removal and after that remove the dents. All parts removed from the engine body such as tires, sheet metals, wiring, seats, and other parts.
- The process begins with sanding the full body of tractor with wet 150 sanding paper.
- Fill the dents with body filler (plastic putty).
- Body filler(plastic putty) dry sanding with 80 sanding paper.
- Use wet sanding with 220 sanding paper.
- Fill N.C. putty on sanded body filler.
- N.C putty sanding with wet 400 sanding paper.
- First coat with Primer.
- Proper Surfacer coating.
- Use 2k high quality paint 3 or more coats.
There is some information about this tractor
Manufacturer - Escort Farmtrac 60
Model - 1996
Engine Detail
Fuel - Diesel
No. of Cylinder - 3
Cooling - Liquid-Cooled
HP Catagory - 50 hp
Capacity CC - 3147 CC
Engine Rated RPM - 2200
Air Filter - Oil Bath Type
Transmission
Type - Constant Mesh
Gears - 8 Forward, 2 Reverse
Tires
Front - 6.00 X 16
Rear - 13.6 X 28/ 14.9 X 28
Power Take-Off (PTO)
Rear PTO - Transmission ( live two-stage clutch)
Clutch - 11 Inch dry disc
Rear RPM - 540
Mechanical
Chassis - 4X2 2wd
Steering - Manual (hydraulic power optional)
Bracks - Mechanical dry disc
Cab - Two -Post-Rops
Hydraulics
Type - Gear Pump
Capacity - 6.3 Gallons (23.8 Litters)
Valves - 2
Pump Flow - 4.5 GPM(7.0 lpm)
Electrical
Ground - Negative
Charging System -Alternator
Charging Ampears - 55
Battery
Number - 1
Cold-Cracking Ampears - 800
Volts - 12
Comments
Post a Comment